Parent Topic: STG

EXAMPLE

A GCP segment must be created using the GCIT program, and flight path parameters must be calculated using the FLIGHT program, before STG can be run.

At this point, OALTI, OHEAD, OPOINT, and OCOEFF should contain the correct flight path parameters, which can be input into the STG program. To run STG, use the same parameter values that were used for the FLIGHT program. In this example, the output ground range radar image is transferred to the second channel of the file containing the elevation data.

 EASI>FILI="gatineau.pix"  | file containing data to be registered
 EASI>FILO="gatdtm.pix"    | output file and location of elevation data
 EASI>DBIC=1               | channel of data to be registered
 EASI>DBOC=2               | channel for registered data
 EASI>DBEC=1               | channel of elevation data
 EASI>RUN STG

Parent Topic: STG
About PCI Help Gateway