Parent Topic: <A href="http://www.pcigeomatics.com/cgi-bin/pcihlp/PROJ">PROJ</a><hr>
<H3>OUTPUT UNITS</H3>
For supported projections, the output map units will take the 
following output format:
<P>
<PRE>
 'proj 9999 r Ennn'

 Where: proj (Characters 1 to 4) is the standard string listed below
        for the projection.  The string is left-justified.  If 
        the standard string is less than 4 characters the string
        is padded with trailing blanks.  (e.g. 'UTM ')

       (Character 5 is blank)

       9999 (Characters 6 to 9) is the zone number, if any.
</PRE>
<UL>
<LI> for the UTM projection, depending on the value of 
the subroutine argument UTMROW, the zone number is
returned right-justified in the range of '   1' to 
'  60' (or '  -1' to ' -60').
<LI> for SPCS projections:  '0101' to '5400'
<LI> for other projections: '    '
</UL>
<PRE>
       (Character 10 is blank)

       r (Character 11) is the UTM or UPS grid zone row, if any.
         For all other systems, this is blank.
        
       (Character 12 is blank)

       Ennn (Characters 13 to 16) Ellipsoid used for the projection
</PRE>
<UL>
<LI> 'E000' to E019' for supported ellipsoids
<LI> Default is 'E000' if no earth model is defined in
MAPUNITS or ELLIPS
<LI> 'E999' is a special case, where the earth model is
not supported but was defined in ELLIPS
</UL>
<hr>
Parent Topic: <A href="http://www.pcigeomatics.com/cgi-bin/pcihlp/PROJ">PROJ</a><br>
<a href="http://www.pcigeomatics.com/dev_corner/pcihlp_gateway.html">About PCI Help Gateway</a>